No, Doggerland is not a new DX entity.
Doggerland was the land between England and Holland/Belgium/Denmark appr. 10,000 years ago. The Northsea has taken its place nowadays.
No, Doggerland is not a new DX entity.
Doggerland was the land between England and Holland/Belgium/Denmark appr. 10,000 years ago. The Northsea has taken its place nowadays.
Last FT8 EU contest on 70 cm I participated with my homebrewed 50 Watt UHF amplifier. The amplifier uses an MRF186 in the final stage to boost the 5 Watt RF signal coming from the 28-432 MHz transverter. The amplifier seems to work well. I was able to make 25 QSO's during the evening (PA, ON, F, DL and G stations). Best DX was with Richard G7KHV in East Yorkshire (IO93vw) over 392 km.
FT8, 432 MHz signals
Amplifier under test
The RF output of my 28 - 70 MHz transverter shows an irritating 3rd harmonic at 210 MHz.
I found a simple Low Pass Filter for 70 MHz at dutchrfshop.nl
The filter should be able to handle RF powers up to 150 Watts.
4 ATC capacitors and 3 coils is all you need:
A couple of months ago I started to trade a bit crypto currency. The idea was to obtain some extra cash for the radiohobby.
I was intrigued by what was going on in the crypto currency community. Learned a lot about altcoins, bullish, bearish, blockchain, ECB, Elon Musk, whales, graphs, quantitative easing. With some trading of Bitcoin, Ethereum, ADA and Dogecoin I have been able to gain some extra's to buy radio stuff.
What's your opinion on crypto currency ?
A spectrum analyser has always been a tool for me that I could not afford.I remember the expensive professional Hewlett Packard and Rohde&Schwarz analyser gear of which we radio hobbyists could only dream of.
The tinySA ('tiny Spectrum Analyser') has changed this.This nice, cheap, device enables you to visualize the radio frequency spectrum up till 960 MHz.
The tinySA has 4 main functions:
- frequency analyser till 350 MHz
- frequency analyser till 960 MHz
- signal generator till 350 MHz (sine wave)
- signal generator till 960 MHz (square wave)
My first visit to VERON A42 clubstation PI4VPO in Hellevoetsluis / Voorne-Putten brought me a nice collection of (paper) QSL cards:
This afternoon some sporadic E clouds were present:
A Schottky diode, also known as Schottky barrier diode or hot-carrier diode, is a semiconductor diode formed by the junction of a semiconductor with a metal.
Typical metals used are molybdenum, platinum, chromium or tungsten, and certain silicides (e.g., palladium silicide and platinum silicide), whereas the semiconductor would typically be n-type silicon.
Schottky barrier diodes have a low forward voltage drop and a very fast switching action (typ. 5 ns).
A silicon p–n diode has a typical forward voltage of 600–700 mV, while the Schottky's forward voltage is 150–450 mV. This lower forward voltage requirement allows higher switching speeds and better system efficiency.
Lately I purchased a bunch of BAT85 Schottky barrier diodes. A typical value for its forward voltage is 200 mV.
I replaced four Ge diodes by BAT85 Schottky diodes in my field strength meter. http://pa2rf.blogspot.com/2020/07/fieldstrength-meter.html?m=1 .
The performance of the meter has certainly increased (higher sensitivity).
More info:
https://en.wikipedia.org/wiki/Schottky_diode
Bunch of BAT85 Schottky diodes